Burkert 8045 - Page 27

27
8045
ENGLISH
CALIBRATION
0......9
ENTER
1- 1+
CLOSED
OPEN
Invert no
1- 1+
CLOSED
OPEN
Invert yes
Contact
Flow
Contact
Flow
4.4.6 RELAY (OPTION)
The parameter definition of the limit contacts is completed within this mode. Two limit
values are entered for each relay : 1 -, 1 + and 2 -, 2 +. The user also has the option
to invert the relays.
l The following conditions must be observed: 1-  1+, 2-  2+.
l Ensure that security provisions are taken for the relay circuits
(3A max).
1- and 2- = the low settings for both relays
1+ and 2+ = the high settings for both relays
4.4.6