14 BURLEY TRAILER OWNER’S INSTRUCTION AND SAFETY MANUAL
Using the Parking Brake
For All Trailers Except the Bee
™
Engage the parking brake by pushing the handle to the right. This pushes
the brake arms outward so that the tip of each brake engages the inside of
each tire. Exercise caution when disengaging the brake, as it may spring to
the left.
To disengage
the brake, move
the handle to
the RIGHT.
Simply move the
handle to the
LEFT to engage
the brake.
Installing the Safety Flag
Bee
™
Only:
On the outer left side of the trailer, insert the safety fl ag pole through the
webbing loop and into the fl ag pocket.
All Other Models:
Insert the safety fl ag pole into the hole in the top of the LEFT handle bar re-
ceiver. (See handle bar illustration on page 12 for location of correct hole.)
DO NOT USE YOUR TRAILER WITHOUT THE SAFETY FLAG.
Installing the Cover
Bee
™
:
Snap the cover snap buttons to the
snap posts on the top of the frame.
Attach the cover’s Velcro hook strips
to the Velcro loop strips on the trailer
body. Then hook the rubber O-rings
over the back and front frame ends. To
stow the window, unhook the O-rings
from the trailer front. Roll the window
up and secure it by inserting it into the
elastic loops at the top.
Cover Snap Button
To Next Page
Loading...
