Burley LADY BUG - Attaching the Handle

12 BURLEY TRAILER OWNER’S INSTRUCTION AND SAFETY MANUAL
Attaching the Handle
d’Lite
™
, Encore
™
, Solo
™
, Lady Bug
™
, Cub
™
(Bee
™
: no handle)
Your trailer comes with a handle which allows for easier maneuvering of the
trailer when it’s not attached to your bicycle. The handle is also an important
part of the optional Burley Jogger Kit
™
and the optional Burley Stroller Kit
™
,
which are available at your Authorized Burley Dealer.
To install the handle, slide it into the lower handle bar receivers and tighten
the knobs. (The upper handlebar receivers have spacers in them for the
optional Burley Rollbar, available from your Burley dealer.) To change the
position, remove the handle from the handle bar receivers, fl ip it over and
reinstall it as described above.
Handlebar
Flag
Rollbar
Accessory
(optional)
Flag Installation
Hole
Knob
Handlebar
Installation