EasyManuals Logo

Burmester 077 User Manual

Burmester 077
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
23
Fader NOTICE: This menu item is only available when 4 Channel Mode is activated.
The option Fader will allow you to increase or decrease the volume of the power amp
connected to the RECORD output in reference to the MAIN output. It is possible to adjust
the volume up to +/- 10 dB.
Select menu item FADER with the left rotary switch or the navigation buttons
on your
remote control.
With the right rotary switch or the navigations buttons
on your remote control you may
select the desired value:
<C> the power amp connected to the RECORD output will have the same volume
as the power amp connected to the MAIN output.
-10 to –01 the power amp connected to the RECORD output will have a reduced volume
in reference to the power amp connected to the MAIN output. The steps are
indicated in dB.
+10 to +01 the power amp connected to the RECORD output will have a increased
volume in reference to the power amp connected to the MAIN output. The
steps are indicated in dB.
Initial volume This menu item preselects the volume for the MAIN level of your device when it is switched
on.
Select menu item M-VOL with the left rotary switch or the navigation buttons
on your
remote control.
With the right rotary switch or the navigation buttons
on your remote control you may
select the desired value:
The range of selection reaches from 01 to 20 and -79 dB to -60 dB respectively, in single
steps.
If the setting LAST is chosen, the volume that was last selected will be used. For security
reasons, this is only possible up to a maximum volume of 20 and. -60 dB respectively.
Volume scale This menu item preselects whether the Volume of the MAIN level is indicated in
BURMESTER or dB steps.
Select menu item M-SCALE with the left rotary switch or the navigation buttons
on
your remote control.
With the right rotary switch or the navigation buttons
on your remote control you may
select one of the following:
BUR Volume indicated in BURMESTER steps (00 to 60)
dB Volume indicated in dB steps (-99dB to +5dB or +21dB at high amplification)

Other manuals for Burmester 077

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Burmester 077 and is the answer not in the manual?

Burmester 077 Specifications

General IconGeneral
BrandBurmester
Model077
CategoryAmplifier
LanguageEnglish

Related product manuals