The ConCepT
10
T C
The 808 MK5 is a unique preamplification system. This is true not only in reference to its
most advanced electronic technology and highest quality manufacturing but also with
regard to its design. Its wide-ranging operational possibilities have made it the
standard of reference in preamplification and the work horse for many audio
developers and audio magazines worldwide.
The 808 MK5 is a modular design. The system consists of:
• The basic unit
• The input modules (maximum of six in any configuration – one necessary)
• The output modules (two possible – one necessary)
• Unused mounting slots are protected by cover plates.
• The SYM OUT output modules for balanced operation (maximum of two possible)
• Modular technology turns the 808 MK5 into a dynamic system.
• From a minimal configuration it may be expanded step by step
• It can be adapted to the changing requirements of its owner at any time.
• Individual modules can be sent in for modification while the system remains with the
owner.
• Technological advances can be incorporated by modifying or exchanging modules;
hence the 808 MK5 maintains its technological edge and its resale value over a very
long time.
Technical specifications such as signal-to-noise ratio, total harmonic distortion and
intermodulation are at the theoretical limits. The owner may rest assured that we have
incorporated any presently known advance. We guarantee that the deviation of
technical data from one unit to the next is less than one percent.
A short explanation of the nomenclature of the 808 MK5:
The design of the original system was concluded in August of 1980 (=80/8). Since then,
we have kept the 808 at the edge of technological advance by incorporation the results
of our research and development into it. The present fifth incarnation (= Mark 5)
represents the leading edge of preamplifier design today. The jump from MK3 to MK5
signifies on the one hand the major advances that were incorporated into the MK5. It
also takes account of sensibilities in the Asian market where 4 is an unlucky number.
Major advances of the MK5 versus its predecessor MK3 XLR:
• Remote control option not only for input selection but also for volume control.
• A display showing the selected input as well as the volume setting.
• Six additional AUX inputs.
• Input and output for TAPE 1 are balanced.
• Major improvements to the power supply.
• The control circuits of the supply voltage have been improved and are now located
directly at the transformer and the filter capacitors in the external housing. There is
an additional filter stage for the supply voltage in the preamplifier.
• Internal wiring has been done exclusively with our proprietary BURMESTER SILVER
cable.
• The PHONO MC module has been totally re-designed and can now be switched
between balanced and unbalanced operation. In addition, dip switches on top of the
module make the mating of the system with a wide range of phono cartridges easy
To Next Page
Loading...
Need help?
General
