TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
Step 14
- Reconnect the Pell Boiler to the electrical
supply. Than the third light of the module -
“cont” must be on.
Step 15
- Go back in the app and type the MAC
address and the PIN code, which can be
found written on the card from the box
set or on the WiFi module. Your smart
device is now connected to the boiler.
.
11.3. “Burnit“ app abblities : After your
smart device is already connected with
the boiler.
With “+” и “-” you can adjust the
temperature, you want the boiler to
maintain. At the bottom right of the
screen is the timer button from which
you can set the boiler to start heating
after specific hours.
To Next Page