To Next PageTo Next Page
Need help?Do you have a question about the Burster 8524 and is the answer not in the manual?
General| Brand | Burster |
|---|---|
| Model | 8524 |
| Category | Measuring Instruments |
| Language | English |
Explains symbols and signal words for hazard identification.
Defines hazard levels associated with signal words like DANGER, WARNING, CAUTION.
Illustrates pictograms used for warnings and advice on protecting the load cell.
Specifies the primary application of the model 8524 load cell for force measurement.
Contact details for support and repair inquiries for the load cell.
Information on whom to contact for questions about the tension and compression load cell.
Instructions on how to download the product's test certificate from the website.
Details the recommended temperature ranges for operating and storing the load cell.
Specifies the conditions required for storing the model 8524 load cell.
Outlines the safety requirements for operating the load cell with instrumentation amplifiers.
Describes limitations and safety regulations for the proper use of the load cell.
Provides instructions and warnings for cleaning the tension and compression load cell.
Specifies that only trained personnel familiar with safety regulations should operate the load cell.
Lists the items included in the package with the model 8524 load cell.
Instructions and warnings related to safely unpacking the load cell and checking for damage.
Details the manufacturer's warranty period and conditions for repairs.
Covers general maintenance aspects, including recalibration recommendations.
Recommends recalibration by the manufacturer after 12 months or sooner based on usage.
States that unauthorized modifications void the warranty and are not permitted.
Describes the horizontally oriented membrane and strain gage placement in the model 8524.
Explains how the load cell converts force into an electrical signal using a spring element and strain gages.
Details the function and material requirements of the load cell's spring element.
Explains the principle of strain gages and their construction as foil laminates.
Describes the Wheatstone bridge configuration for strain gages to minimize measurement influences.
Explains the small deformation of the elastic membrane under maximum load.
Warns against external forces like transverse, bending, or torsional forces that falsify measurements.
Discusses optional mechanical overload protection and how to detect overloads.
Details the electrical insulation and grounding requirements for the sensor body.
Specifies requirements for the mounting surface and the application of force.
Describes the correct mounting surface and bolt specifications for securing the load cell.
Explains signal output, required resolution, and guidelines for electrical connections.
Details the pin configurations for different connector options of the load cell.
Specifies the pin assignment for the 9-pin D-sub socket with a 6-wire system.
Details the 9-pin D-sub socket connection with 6-wire system and TEDS.
Describes the 9-pin D-sub socket connection with 4-wire system for specific indicators.
Explains the 12-pin round connector pin assignment for connecting the load cell.
Details the 8-pin connector pin assignment for the load cell.
Details interference immunity and emission compliance with EN standards.
Specifies interference immunity requirements in industrial environments.
Specifies interference emission compliance requirements in industrial environments.
