BUSCH Mink MM 1322 AV User Manual

56 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Installation and

Operating Instructions

Vacuum Pumps

MINK MM 1324, 1202, 1252, 1322 AV

ATEX-Version

Busch Produktions GmbH

Schauinslandstr. 1

79689 Maulburg

Germany

0870145304 / 190709 / Original instructions / Modifications reserved

Table of Contents

Other manuals for BUSCH Mink MM 1322 AV

Instruction Manual40 pages

Questions and Answers:

N
Nicholas HerringSep 7, 2025
What to do if my BUSCH Mink MM 1322 AV runs too hot?
- C
  Christy SmithSep 7, 2025
  If your BUSCH Water Pump is running too hot, consider the following: * Insufficient cooling: Remove any dust and dirt from the machine. * High ambient temperature: Ensure the ambient temperature is within the permitted range (refer to Technical Data). * High process gas temperature at the inlet: Make sure the gas inlet temperature is within the permitted limits (refer to Technical Data). * Low oil level: Top up the oil.
D
Daniel GarzaSep 8, 2025
What to do if my BUSCH Mink MM 1322 AV Water Pump does not reach the usual pressure on the suction connection?
- L
  Lori Perez DVMSep 8, 2025
  If your BUSCH Water Pump isn't reaching the usual pressure on the suction connection, check these items: * The inlet screen (IS) may be partially clogged. Clean the inlet screen (IS). * If equipped, the inlet filter cartridge might be partially clogged. Replace the inlet filter cartridge. * Internal parts may be worn or damaged. Contact Busch to repair the machine.
N
noblealyssaSep 13, 2025
What to do if BUSCH Mink MM 1322 AV Water Pump starts but runs noisily?
- H
  higginsjacobSep 13, 2025
  If your BUSCH Water Pump starts but runs noisily or rattles, check for loose connections in the drive motor terminal box, ensuring all motor coils are properly connected according to the connection diagram, especially on motors with six coils. Tighten or replace any loose connections. Also, verify the pump is running in the correct direction. If these steps don't resolve the issue, the pump may need repair.

BUSCH Mink MM 1322 AV Specifications

General

Brand	BUSCH
Model	Mink MM 1322 AV
Category	Water Pump
Language	English

Summary

Busch Vacuum Pump Preface

Busch Vacuum Pump Product Description

Use

Specifies the intended application and media for the vacuum pump.

ATEX Classification

Explains ATEX classification for potentially explosive atmospheres.

Busch Vacuum Pump Safety

Intended Use

Defines handling and intended industrial use of the vacuum pump.

Safety Notes

Highlights potential hazards and essential safety precautions.

Busch Vacuum Pump Principle of Operation

Busch Vacuum Pump Transport and Storage

Transport without Packaging

Instructions for handling the pump when not in original packaging.

Conservation

Procedures for conserving the pump before storage.

Busch Vacuum Pump Installation and Commissioning

Installation Prerequisites

Essential conditions required before starting the installation process.

Mounting Position and Space

Requirements for the pump's location and surrounding space.

Busch Vacuum Pump Suction Connection

Busch Vacuum Pump Gas Discharge

Busch Vacuum Pump Electrical Connection and Piping

Electrical Connection / Controls

Instructions for electrical connections and control system integration.

Connecting Lines/Pipes

Guidelines for connecting suction and discharge lines.

Busch Vacuum Pump Checking Instrumentation Function

Busch Vacuum Pump Operating Notes

Use

Specifies the intended application and media for the vacuum pump.

Busch Vacuum Pump Maintenance Schedule

Monthly

Details the maintenance tasks to be performed monthly.

Every 3 Months

Details the maintenance tasks to be performed quarterly.

Every 6 Months

Details the maintenance tasks to be performed semi-annually.

Busch Vacuum Pump Overhaul

Busch Vacuum Pump Removal from Service

Temporary Removal from Service

Procedure for temporarily taking the pump out of service.

Busch Vacuum Pump Dismantling and Disposal

Busch Vacuum Pump Troubleshooting

Problem Identification

Lists common issues encountered with the vacuum pump.

Causes and Remedies

Details potential causes and solutions for pump problems.

Busch Vacuum Pump Spare Parts

Busch Vacuum Pump EU Declaration of Conformity

Busch Vacuum Pump Technical Data

Version with Ex-motor

Technical specifications for pumps equipped with Ex-motors.

WIKA Equipment Documentation Measurement and Safety Instrumentation

Overview

General overview of measurement and safety instrumentation documentation.

Version with Resistance Thermometer, without Transmitter

Documentation for resistance thermometers without a transmitter.

WIKA General Information

WIKA Safety

2.1 Intended Use

Specifies the intended industrial use of WIKA instruments.

2.3 Additional safety instructions for instruments per ATEX and IECEx

Specific safety instructions for ATEX/IECEx certified instruments.

WIKA Specifications

3.1 Resistance thermometer

Technical specifications for WIKA resistance thermometers.

WIKA Commissioning and Operation

6.1 Electrical connection

Instructions for making electrical connections for WIKA instruments.

6.3 Electrical connection of thermocouples

Specifics for connecting WIKA thermocouples.

WIKA Hazardous Area Installation

7.1 General information on explosion protection

General principles of explosion protection for hazardous areas.

7.4 Mounting examples in hazardous areas

Examples of installation methods in hazardous areas.

WIKA Electrical Connection Values

8.1 Electrical data without built-in transmitter or digital display

Electrical data for WIKA instruments without built-in transmitters.

WIKA Calculation Examples

9. Calculation examples for self-heating at the sensor/thermowell tip

Examples for calculating self-heating effects in sensors.

WIKA Maintenance and Cleaning

10.1 Maintenance

General maintenance guidelines for WIKA instruments.

WIKA Faults

WIKA Dismounting, return and disposal

12.1 Dismounting

Procedures for safely dismounting WIKA instruments.

WIKA EC declaration of conformity

WIKA ATEX Certificate Schedule

For applications without transmitter (digital display) which require devices of the group II (explosive gas atmospheres)

ATEX data for gas atmospheres without transmitters.

Related product manuals

Preview: BUSCH Mink MM 1324 AV

BUSCH Mink MM 1324 AV

Preview: BUSCH Mink MM 1202 AV

BUSCH Mink MM 1202 AV

Preview: BUSCH Mink MM 1252 AV

BUSCH Mink MM 1252 AV

Preview: BUSCH MINK MM 1402 AV

BUSCH MINK MM 1402 AV

Preview: BUSCH MINK MM 1502 AV

BUSCH MINK MM 1502 AV

Preview: BUSCH MINK MM 1104 BV

BUSCH MINK MM 1104 BV

BUSCH MINK MM 1144 BV

BUSCH MINK MM 1102 BV

BUSCH MINK MM 1142 BV

Preview: BUSCH MINK MM 1104 CVM

BUSCH MINK MM 1104 CVM

Preview: BUSCH MINK MV 0040 D

BUSCH MINK MV 0040 D

Preview: BUSCH Mink MI 1252 BV

BUSCH Mink MI 1252 BV