BUSCH R5 ATEX - Oil Level Inspection; Oil and Oil Filter Change

Maintenance | 7
0870570604_RA0165-0305D_Ex_-0011_IM_en 25 / 36
7.2 Oil Level Inspection
• Shut down the machine.
• When the machine is stopped, wait 1 minute before checking the oil level.
MAX
MIN
MAX
MIN
MAX
MIN
• Fill up if necessary, see Oil Filling [►15].
7.3 Oil and Oil Filter Change
NOTICE
Use of an inappropriate oil.
Risk of premature failure!
Loss of efficiency!
• Only use an oil type which has previously been approved and recommended by
Busch.
1
2
Drain pan
1x o-ring, part no.:
0486 000 505