Device Information
34 | 44 Instruction Manual VACTEST PPP 700 D_EN_en
Sensor Info
Under this menu item information regarding the sensor of your device is listed, for example param-
eters that will help to estimate the degree of wear and tear.
Displayed is a counter of operating hours as well as the number of operating hours which have
elapsed since the last zero adjustment of the sensor.
NOTE
Any validation of the degree of wear must always be related to the specific application!
File System
This menu item can be used to format the file system of the data memory, e.g. in order to delete all
recorded measurements.
Factory defaults
Under this menu item all device parameters can be reset to factory defaults.
To Next Page
Loading...
