Why am I getting a high measurement error with my BUSCH Measuring Instruments?
A high measurement error in your BUSCH Measuring Instruments could be due to several factors: contamination, ageing, extreme temperature, or maladjustment. You can try readjusting the unit or replacing the sensor. If the problem persists, send the unit in for repair.
What to do if my BUSCH VacTest Measuring Instruments display shows "Err"?
If your BUSCH Measuring Instruments display shows "Err", it could be due to: * Adjustment done at wrong pressure: ensure the displayed pressure is >40 mbar for atmosphere adjustment or
What to do if my BUSCH VacTest Measuring Instruments show error message "Err1"?
If your BUSCH Measuring Instruments show the error message "Err1", it indicates a defective sensor. You should send the unit for repair.
General| Brand | BUSCH |
|---|---|
| Model | VacTest |
| Category | Measuring Instruments |
| Language | English |
Setting pressure thresholds to control relays.
Lists commands for device info, measurement, and settings.
Lists commands for degas, cathode control, and gas correction factors.
Table of settings for relay modes.
Managing the ionization sensor's operation and mode.
How to select voltage signal for sensor control.
Step-by-step instructions for replacing the sensor head.
Solutions for measurement errors and communication issues.
Details on measuring range, uncertainty, and electrical interfaces.
To Next Page
