EU Declaration of Conformity | 11
Instruction Manual VACTEST DCC 400_EN_en 21 / 24
11 EU Declaration of Conformity
This Declaration of Conformity and the CE-mark affixed to the nameplate are valid for the gauge within the Busch
scope of delivery. This Declaration of Conformity is issued under the sole responsibility of the manufacturer.
The manufacturer Busch Produktions GmbH
Schauinslandstr. 1
DE-79689 Maulburg
declare that the gauge VacTest DCC 400
has been manufactured in accordance with the European Directives:
– ‘Electromagnetic Compatibility (EMS) ’ 2014/30/EU
– ‘RoHS’ 2011/65/EU, restriction of the use of certain hazardous substances in electrical and electronic equip-
ment
and following the standards.
Standard Title of the Standard
EN 61326-1:2013
Group 1 / Class B
Electrical equipment for measurement, control and laboratory use. EMC re-
quirements. General requirements
EN 50581:2012 Technical documentation for the assessment of electrical and electronic prod-
ucts with respect to the restriction of hazardous substances
Person authorised to compile the technical file: Gerd Rohweder
Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Maulburg, 24.08.2017
Martin Gutmann, General director
To Next Page
Loading...
