UK Declaration of Conformity
40 | 44 Instruction Manual VACTEST PPP 700 D_EN_en
10 UK Declaration of Conformity
The manufacturer Busch Produktions GmbH
Schauinslandstr. 1
DE-79689 Maulburg
declares that the gauge: VACTEST PPP 700 D
fulfill(s) all the relevant provisions from UK legislations:
– Electromagnetic Compatibility Regulations 2016
– Restriction of the use of certain hazardous substances in Electrical and Electronic Equipment Regulations 2012
– Radio Equipment Regulations 2017
– Electrical Equipment (Safety) Regulations 2016
and comply(-ies) with the following designated standards that have been used to fulfill those provisions:
Standards Title of the Standard
EN 61326-1: 2013
Group 1 / Class B
Electrical equipment for measurement, control and laboratory use. EMC requirements. General re-
quirements
EN IEC 63000:2018 Technical documentation for the assessment of electrical and electronic products with respect to the
restriction of hazardous substances
EN 61010-1 : 2010 + A1 : 2019
+ A1 : 2019 / AC : 2019
Safety requirements for electrical equipment for measurement, control, and laboratory use. General
requirements
EN 300 328 V2.2.2 Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Har-
monized Standard for access to radio spectrum
EN 301 489-1 V2.2.3 ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;- Part1: Common
technical requirements; Harmonised Standard for ElectroMagnetic Compatibility
EN 301 489-17 V3.2.4
ElectroMagnetic Compatibility(EMC)standard for radio equipment and services;- Part17: Specific condi-
tions for Broadband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility
EN 62311 : 2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electro-
magnetic fields (0 Hz - 300 GHz)
Legal person authorized to compile the technical file and importer in the UK
(if the manufacturer is not located in the UK):
Busch (UK) Ltd
30 Hortonwood
Telford – UK
Maulburg, 02.01.2024
Dr. Martin Gutmann
General Manager
Busch Produktions GmbH