EasyManua.ls Logo

Busch+Müller IQ-X - Technical Specification; Assembly

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
5. Technical specification
Headlight dimensions: Height: 55 mm | Length: 46 mm | Width: 54 mm | 120 g
Brightness: 150 Lux
Preconditon: Alternating current (dynamo operation)
NOTICE
Please contact your bicycle specialist if you require special e-bike headlights for DC voltage
from 6 to 42 V.
6. Assembly
6.1. General information
!
Make sure your headlight is not covered under any circumstances. Take care that the headlight has
been mounted and aligned as prescribed. For headlights with a separate reflector, make sure that the
make sure that the reflector
3
is aligned perpendicular to the road surface.
In Germany, the prescribed mounting height for headlights
1
and reflectors
3
ranges between about
400 and 1,200 mm. For details, consult your national Road Traffic Regulations or contact a local bicycle
specialist retailer. Always make sure the headlight is mounted and aligned in a way to ensure that
oncoming traffic is not blinded.

Table of Contents