34 Using your Outdoor DAB Radio
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
setting.
With your radio switched on (not in Standby mode):
1. Press and hold the Menu/Info button to enter the menu options.
2. Use the Tune control to scroll to <System>. Press and release the Enter button.
3. Use the Tune control to scroll to <Backlight>. Press and release the Enter button.
4. <Timeout> is displayed. Press and release the Enter button. Use the Tune control to
scroll through the available backlight timeout options of On, 10, 20, 30, 45, 60, 90, 120
or 180 seconds. Stop when the backlight timeout you would like is displayed and press
and release the Enter button. <Timeout> will be displayed.
You can now use the Tune control to scroll and the Enter button to select, as you did to
set the Backlight timeout, to change the settings for the backlight brightness for the <Dim
level> and <On level>. There are 3 options available, High, Medium and Low.
Display language
You can change the display language of your radio, there are 4 options available; English,
French, German and Italian. An ‘*’ will be displayed next to the current setting.
With your radio switched on (not in Standby mode):
1. Press and hold the Menu/Info button to enter the menu options.
2. Use the Tune control to scroll to <System>. Press and release the Enter button.
3. Use the Tune control to scroll to <Language>. Press and release the Enter button.
4. Use the Tune control to scroll to the language you would like. Press and release the
Enter button to confirm.
Software version
You can check the software version of your radio.
Using your Outdoor DAB Radio
Let’s get started
To Next Page
Loading...
