43
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
The function buttons do not respond:
• Check that the mains power lead is connected at the back of your radio and the mains
power wall socket is switched on. Press and release the Standby button.
• Check that you are trying to use the function buttons for the mode that you are in.
(Play/pause, Skip forward and Skip back will only work in Bluetooth mode).
• If you are using batteries, they may be exhausted and need to be replaced.
• Unplug the mains power and remove the batteries. Leave the radio for 3 minutes and
then reconnect the power.
• Try a reset to factory defaults. See page 35.
Note: All of your settings, including the radio station list and any presets will be deleted
when you reset the Radio.
To Next Page
Loading...
