EasyManua.ls Logo

Bush AB320 - User Instructions; Thermostat Setting; Display Panel

Bush AB320
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Customer Helpline 0845 600 4632
User Instructions
The freezer and refrigerator thermostats
automatically regulate the inside temperature of the
compartments. By rotating the knob from positions
1 to 5, colder temperatures can be obtained. The
‘0’ position denotes the thermostat is closed and
no cooling is available.
Freezer thermostat setting;
0: The appliance is switched off.
1-2: For short-term storage of food in the freezer
compartment, set the knob between the
minimum and medium position.
3-4: For long-term storage of food in the freezer
compartment, set knob to the medium
position.
5: For freezing fresh food. The appliance will run
for colder temperatures.
Freezing with super freeze (SF button):
Press the SF button whereupon the freezer
will start to run continuously with maximum
performance (observe that the SF lamp will light
orange when you press the SF button). The freezer
temperature will decrease and the appliance will
switch to the lowest temperature.
Place the food to be frozen inside the freezer
quickly, preferably in the top drawers. Once the
food is frozen, you must turn off the SF button and
set the thermostat knob to the desired position.
Super Freeze Light (SF Light): Lights orange when
the SF button is turned on.
Power Light: Automatically lights green when the
appliance is connected to the power supply.
Alarm Light: Lights red when the temperature rises
to a critical point inside the appliance.
Turning on the appliance
Once the appliance has been connected to the
power supply, make sure that the green lamp is
on - then turn the refrigerator thermostat dial and
the freezer thermostat dial between positions
2-4. It should be noted that for the best internal
temperature, the indicator in the refrigerator and
freezer thermostat should be positioned between 2
and 4).
• When you rst switch on the appliance (to enable
suitable cooling), the appliance should operate
for 24 hours continuously until it cools to a
suf cient temperature.
• During this time, do not open the door frequently
and do not place a lot of food inside the
appliance.
• If the unit is switched off or unplugged, you
must allow at least 5 minutes before restarting or
re-connecting the unit to prevent damage to the
compressor.
Display panelThermostat setting
Super freeze Power Alarm Alarm
Combi models with single compressor
Thermostat knob

Related product manuals