5
Customer Helpline 0845 600 4632
• Before installation, read the instructions
carefully.
• Fit the refrigerator/freezer in stable kitchen
units only.
• If necessary, reverse the door according to
instructions.
Before Using the Appliance
Recommendations
• Before switching on, place the appliance in
an upright position and wait at least three
hours without moving the appliance. This will
give the freezing circuit time to settle and
operate effi ciently.
• Clean the appliance thoroughly, especially
the interior, before use (see Cleaning and
Maintenance).
• Installation of the appliance and electrical
connections must be carried out by a qualifi ed
technician in accordance with the installation
manual and local regulations.
• The procedure for installing the appliance into
the kitchen unit is given in the installation manual.
This product is only intended to be used in proper
kitchen units.
• The appliance must be connected with a properly
installed fused socket. Power supply (AC) and
voltage at the operating point must comply with
the details on the name plate of the appliance
(the name plate is located on the inside-left of the
appliance).
Switching on the appliance
• Insert the plug into a socket with an effi cient ground
connection. If the socket has no ground contact or
the plug does not match, we suggest you to call an
authorised electrician for assistance.
• In order to avoid a hazard, if the supply cord is
damaged it must be replaced by an appointed
service agent or similarly qualifi ed person.
• The manufacturer is not responsible for failure to
complete the ground connection as described in this
booklet.
• There can be an odour when you fi rst switch on the
appliance. It will disappear after the appliance starts
to cool.
To Next Page
Loading...
