BCR35DAB
- 7 -
DAB+ Operation
Listening to DAB+ Radio
1. Press the " " button to turn the unit on.
2. Press the MODE button to select the DAB mode.
3. Press the SCAN button, the following screen will be displayed. A bar graph indicating
the progress of the DAB+ station search. The number of stations found increases as
the scan progresses.
DAB
Progress bar
Number of stations found
DON'T FORGET!
To improve reception, try adjusting the position of the antenna.
Changing DAB+ Stations
1. Press the " < " & " > " buttons to scroll through the stations in the station list.
3. The radio will tune to the new station.
DON'T FORGET!
If no new station is selected the unit will display the currently playing station after
5 seconds.
From time to time new DAB+ stations may be added to the DAB+ station list. If
you wish to see if any new stations have been added, press the SCAN button to
activate a full scan.
Storing DAB+ Presets
1. You can preset up to 10 DAB+ stations for easy access as follows:
2. Press the " < " & " > " buttons to scroll through the stations in the station list.
3. Press the SELECT button to confirm to the station you wish to preset.
4. Press and hold the PRESET button, preset position 1 will show in the display.
5. Press the " < " & " > " buttons to select the required preset memory position.
6. Press the SELECT button to confirm.
7. Repeat steps 2-6 to store more preset stations.
DAB Mode display
Volume bar
To Next Page
Loading...
