Getting to know your Built-in Hob
17
or online at www.bush-support.com If you still require further assistance, call one of our experts on
01759 487838
Installing your Built-in
Hob
Bringing it all together
When you have installed the hob, make sure that
• The
power supply cable is not accessible through cupboard doors or drawers.
• There is adequate flow of air from outside the cabinetry to the base of the hob.
• The
isolating switch is easily accessible by the customer.
Before locating the fixing brackets
The unit should be placed
on a stable, smooth surface (use the
packaging).
Do
not apply force onto the controls protruding from the
hob.
Locating the fixing brackets
• The
unit should be placed on a stable, smooth surface (use the
packaging).
Do not apply force onto the controls protruding from the hob.
• Fix
the hob on the work surface by screw two brackets on the
bottom of hob
(see picture) after installation.
• Adjust the bracket position to suit for different work surface’s thickness
• If the hob is installed above a drawer or cupboard space, a thermal
protection barrier is installed below the base of the hob.
To Next Page
Loading...
