Page 7
User instructions
Controlling a paired device
Once connected you can either use the controls on
the audio device to begin playback, skip tracks etc.
Or you can use the control buttons on the sound bar &
remote.
1: The PLAY/PAUSE button (19) when pressed will begin
playback of the selected track on the audio device.
Press again to pause playback.
2: To skip to the next track press the
button (18).
3: To skip to the previous track press the
button (16).
4: Any further operations must be done from the audio
device.
NOTE: the volume output is effected by the
volume level on the audio source EG: Phone or
laptop, so make sure that is set to about 70-80% (
not too loud to avoid distortion).
Bluetooth notes
• The operation range of bluetooth is approximately 10
meters (30 Feet). Any obstacles in the path between
devices may reduce this range.
• Only one Bluetooth device can be paired at a time.
• Not all Bluetooth devices are compatible.
To Next Page
Loading...
