Bush CMP41DS - Camera & Video Camera; Camera Operations; Video Camera Operations

Page 10
User instructions
Tuner region
1: Press and hold the ‘M’ button and select ‘Tuner
Region’.
2: Set the required region and press the ‘SELECT’
button to store the setting.
Mute
1: Press and hold the ‘M’ button and select ‘Mute’.
2: To re-enable the audio follow step ‘1’ again.
Camera
1: Select ‘CAMERA’ from the main menu.
Basic camera controls
Photo shooting
1: Press the ‘SELECT’ button to take a photo.
2: Use the
button to zoom in. Press repeatedly to
cycle between 1X, 2X & 3X.
Camera function menu
1: Press and hold the ‘M’ button to display the menu.
Picture playback
Select to review photos
White balance
Select a setting which best suits your environment to try
and balance the colours.
Brightness
Adjust the brightness level of the display.
Exposure mode
Select a mode to best suit your environment :- Auto,
Indoor or outdoor.
Sticker photo
Choose from a number of preset fun backgrounds to
enhance your portrait photos.
Special effect
Choose from three colour effects of: Black & White,
Sepia or Negative.
Resolution
Specify the resolution of photographs saved to the
internal memory.
Memory free space
Displays the available free space on the internal
memory.
Self timer
Set a shutter time delay in seconds.
Continuous shooting
When set the camera will continue to take a photo for
the time you set until you press the ‘M’ button.
Shutter sound
Choose from a list of shutter sounds.
Date stamp
When enabled this setting adds a Date or TIme & Date
stamp to each photograph taken there after.
Video camera
1: Select ‘VIDEO CAMERA’ from the main menu.
Basic video camera controls
Video shooting
1: Press the ‘SELECT’ button to begin recording.
2: Press the ‘SELECT’ button to pause recording.
3: Use the
button to zoom in. Press repeatedly to
cycle between 1X, 2X & 3X.
4: To save the recording press the ‘M’ button.
NOTE: The zoom function is only available when in
stop mode.