Bush CMP41DS - Play Mode; Add to My Playlist; Set Rating; Add a Tag

Page 6
User instructions
Play mode
Select a playback mode from the below options.
Sequence Play tracks in sequence
Repeat One Repeat a single track
Repeat All Repeat all tracks
Shuffle Play tracks in a random order
Add to my playlist
Select this option to add the selected track to a playlist.
1: Select ‘Add to my Playlist’ and press the ‘SELECT’
button to enter the Playlist menu.
2: Choose which playlist 1-5 you wish to add the track
to.
3: Press the ‘M’ button repeatedly to return back to the
music playback screen.
Set rating
Choose a track rating between 1-5.
1: Select ‘Set Rating’ and press the ‘SELECT’ button to
enter the rating menu.
2: Use the
/ buttons to select a rating from
1-5 and then press the ‘SELECT’ button to store the
setting.
Add a tag
Similar to playlist you can tag multiple tracks to appear
in the ‘tag list’ on the music filter menu.
1: Select ‘Add Tag’ and press the ‘SELECT’ button to tag
the current track.
2: From the Music filter menu (EG:-Select ‘MUSIC’ from
the main menu) select ‘Tag List’ to display all tagged
tracks.
A-B repeat
1: Select ‘AB Repeat’ and press the ‘SELECT’ button to
begin the AB repeat setup process.
2: Press the ‘Play/ Pause’ button to set the ‘A’ marker
(beginning of the repeat section). Press the ‘Play/
Pause’ button once more to set the ‘B’ marker (end of
the repeat section).
3: The selected audio will now repeat for the specified
amount of times (see point 4).
A-B repeat (cont)
4: To specify the amount of repeat times select
‘Advanced’ from the audio function menu and select
‘Replay Times’. Press the ‘SELECT’ button.
5: Use the
/ buttons to set the number of times
the replay is to repeat. Press the ‘SELECT’ button to
activate.
6: From the advanced audio function menu you can
choose ‘Replay Interval’ to specify the length of time
in-between each ‘repeat’. Use the
/ buttons
to set the interval time. Press the ‘SELECT’ button to
activate.
Delete a track
1: Select ‘Delete’ and press the ‘SELECT’ button.
2: Press ‘Yes’ when asked ‘Delete disk file?’.
Advanced audio menu
1: Select ‘Advanced’ from the audio function menu and
press the ‘SELECT’ button.
Scan speed
Specify the speed at which the fast forward/ fast rewind
scan functions operate.
1: Select ‘Scan Speed’ and press the ‘SELECT’ button.
2: Use the
/ buttons to increase or decrease the
scan speed from:- 2X, 4X, 8X, 16X & 32X.
3: Press the ‘SELECT’ button to store the setting.
User EQ
This function allows you to create your own EQ setting .
Selectable in ‘EQ modes’.
1: Select ‘EQ Settings’ and press the ‘SELECT’ button.
2: Press the ‘SELECT’ button once more to enter the
‘User EQ’ programme screen.
3: Use the
/ buttons to increase or decrease the
gain slider for each frequency range.
4: Use the ‘Play/ Pause’ button to switch frequency
range sliders.
5: Press the ‘SELECT’ button to store the EQ setting.
6: Follow steps 1-3 of ‘EQ modes’ page 5 to enable the
new EQ setting.