Bush DAB30 - Display settings and language

Using your DAB/FM Radio with Bluetooth
Let’s get started
Using your DAB/FM Radio with Bluetooth
Let’s get started
Using your DAB/FM Radio with Bluetooth
Using your DAB/FM Radio with Bluetooth
34
35
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
4. Use the Tune/Select rotary control scroll through the available options. Stop when
the sleep time you would like is displayed and press the Tune/Select rotary control to
select. <Sleep> will be displayed.
5. Press the Menu/Info button to return to the radio display. The sleep time minutes that
you have selected will be displayed on the top line of the display and will countdown
until the radio switches off.
Note: To cancel the sleep time, follow the steps to set the sleep time but stop when
‘Sleep off’ is displayed.
Cancel the Sleep timer
1. Press and hold the Menu/Info button to enter the menu options.
2. Use the Tune/Select rotary control to scroll to ‘System’. Press the Tune/Select rotary
control to select.
3. Use the Tune/Select rotary control to scroll to <Sleep>. Press the Tune/Select rotary
control to select.
4. Use the Tune/Select rotary control to scroll to ‘Sleep off’. Press the Tune/Select rotary
control to select. <Sleep> will be displayed.
5. Press the Menu/Info button to return to the radio display.
Display backlight timeout
You can adjust the display backlight timeout. Options of permanently On, 10, 20, 30, 45,
60, 90, 120, and 180 seconds are available.
Note: An ‘*’ will be displayed next to the current setting.
In DAB or FM mode:
1. Press and hold the Menu/Info button to enter the menu options.
2. Use the Tune/Select rotary control to scroll to ‘<System>’. Press the Tune/Select rotary
control to select.
3. Use the Tune/Select rotary control to scroll to ‘<Backlight>’. Press the Tune/Select
rotary control to select.
4. ‘<Timeout>’ is displayed. Press the Tune/Select rotary control to select. Use the Tune/
Select rotary control to scroll through the available backlight timeout options of On,
10, 20, 30, 45, 60, 90,120 or 180 seconds. Press and release the Tune/Select rotary
control to select.
5. Press and release the Menu/Info button to return to the station display.
Display language
You can change the display language of your radio, there are 4 options available; English,
French, German and Italian.
Note: An ‘*’ will be displayed next to the current setting.
In DAB or FM mode:
1. Press and hold the Menu/Info button to enter the menu options
2. Use the Tune/Select rotary control to scroll to ‘<System>’. Press the Tune/Select rotary
control to select.
3. Use the Tune/Select rotary control to scroll to ‘<Language>’. Press the Tune/Select
rotary control to select.
4. Use the Tune/Select rotary control to scroll to the language you would like. Press the
Tune/Select rotary control to select.
5. Press and release the Menu button to return to the station display.