HERITAGE
13
Factory Reset
A factory reset resets all user settings to default values, so time/date and presets are lost.
It can be reached via press the Menu button Æ Turn the Tune/Select knob to the Factory Reset menu Æ Turn the
Tune/Select knob to ‘YES’Æ Press the Tune/Select knob to confirm.
Get SW Version
Press Menu button Æ Turn the Tune/Select knob to the SW version menu Æ Press Tune/Select knob to confirm.
The software version will show on the display.
Set Eq
Select this option to choose a sound equalisation profile. Each of the equalisation settings will change the tone of the
sound from your radio when selected.
1. Press Eq button on the unit to select ' Equaliser '.
2. Turn Tune/Select knob and then press it to select Normal, Classic, Jazz, Pop, Rock, Speech or My EQ.
3. To set up My EQ, select 'My EQ', and then set up Treble and Bass.
Set Alarm
Your radio includes dual alarms. Setting Alarm, make sure setting time at first.
1. Press Alarm button on the unit repeatedly to select ‘Alarm 1’ or ‘Alarm 2’,
or will flash on the display, Press
Tune/Select knob to confirm
2. Turn Tune/Select knob to select options, and then press Tune/Select knob to confirm the setting.
DAB, FM or Buzz (since you were selected DAB or FM as alarm source,
select last listened or saved preset station to play when alarm sounds)
3. When the display shows 'Alarm Saved', the alarm setting is successful.
4. To temporarily switch off alarm, press Tune/Select knob to activate Snooze function when the alarm is sounding.
Press Tune/Select knob repeatedly can set Snooze time of 5, 10, 15 or 30 minutes in turn. The set snooze time
will show as "Snooze mm : ss" on the display.
5. To turn off alarm, press Volume/Standby knob or Alarm button when the alarm is sounding.
6. To cancel Alarm, refer to steps1-3 to set Alarm states to ‘Off’.
To Next Page
Loading...
