1.
Care & maintenance
After using the Soundbar
Set to Standby.
Switch the unit off at the mains and unplug it if you are
leaving it unattended for a long period (holidays etc).
Avoid leaving the battery fitted in the remote control if
you leave the unit unattended for long periods. It may
leak and damage the remote control.
Technical specification
Care & cleaning
All care and cleaning operations should be carried out
with the unit unplugged from the mains power.
Occasionally wipe the cabinet with a lint free duster.
Never clean the unit with liquids or solvents.
Amplifier
Power output 100W MAX
Frequency response 20Hz - 20KHz ± 3dB
Input sensitivity 550 mV
Main unit
Power supply INPUT: 100-240V ~ 50-60Hz
OUTPUT: 24V
1.5A
Power consumption 25W
Standby power consumption ≤ 0.5W
Full range speaker drivers
Subwoofer
Impedance: 4 Ohm, 52mm (2”)
Frequency response: 250Hz ~ 20KHz
Impedance: 8 Ohm, 116mm (5.25”)
Frequency response: 35~200Hz
Dimensions Soundbar: 730 x 60 x 62mm
Sub woofer: 178 x 221 x 296mm
Mains cable length 1.5M
Remote control
Battery 1 x CR2032
Bluetooth
Bluetooth compatibility EDR, A2DP, AVRCP
Bluetooth version 2.1
To Next Page
Loading...
