Using your CD Micro HiFi
Let’s get started
Using your CD Micro Hi-Fi
33
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
• Pause
Press and release the button. The elapsed time of the track will flash in pause
mode. Press and release the button again to continue to play the track/CD.
• Next track:
Press and release the button.
• Previous track:
Press and release the button.
• Fast forward within a track:
Press and hold the button.
• Fast backward within a track:
Press and hold the button.
• Stop
Press and release the button
Programmed play mode
In programmed play mode, you can program the play order of the tracks on your CD. You
can program up to 20 tracks in total.
Note: To set up programmed play mode, the CD must be stopped in the CD
compartment and must not be paused or playing.
In CD mode, with the CD you wish to programme in the CD compartment and stopped:
1. Press and hold the Preset button to enter CD programmed play mode. ‘P01 T01’ will
be displayed and the ‘T01’ will flash.
2. Use the or buttons to go to the track number that you would like to program
to play first. Press and release the Rotary navigation control to confirm.
To Next Page
Loading...
