Using your CD Micro HiFi
Let’s get started
Using your CD Micro Hi-Fi
35
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
• If dust or marks cannot be removed with a soft cloth, wipe the disc lightly with a
slightly damp soft cloth and then wipe with a soft dry cloth.
• Do NOT use any type of solvent, commercially available cleaners or antistatic spray for
vinyl as it may damage the disc.
• Do NOT store discs in a place subject to direct sunlight or near a heat source.
• Do NOT store discs in a place subject to moisture or dust, such as a bathroom or near
a humidifier.
Auxiliary Input mode
Check that your HiFi is in Auxiliary input mode. If you are not already in Auxiliary input
mode, briefly press and release the Mode button until you are in Auxiliary input mode
(check the display).
Using a 3.5mm audio input connection cable (not included), Auxiliary input allows for a
quick and easy connection to an external sound source.
1. Connect one end of the 3.5mm audio connection cable to the headphone (or
auxiliary out) socket of your secondary device, connect the other end to the Aux in
socket on the back of your HiFi.
2. Press the Play button on your external device to start playback through the HiFi
speakers.
To gain optimal volume levels, adjust the output volume level on both the secondary
device and on the HiFi.
Note: It is recommended that you unplug the Audio cable from the Aux in socket after
you have finished listening to your external device.
To Next Page
Loading...
