EasyManua.ls Logo

BUTURE JR400 - Maintenance

BUTURE JR400
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
• Use the small cleaning brush to sweep away the trash on the roller.The knife side
used to remove the tangled hairs from brush roller.
1. The filter can be cleaned with warm water. After cleaning it must be thoroughly dried
before putting it back into use. Do not immerse the main unit in water or any liquid.
2. Clean the hoover casing only with a soft, slightly damp cloth. Do not allow any liquid
substances to enter the hoover.
3. Do not use any corrosive chemicals or abrasives.
4. It is recommended to change the Hepa filter every 2 months (depending on use) to
ensure optimum performance. Do not use the filter when it is damaged or worn out.
MAINTENANCE
• Clean the roller brush with/without water.
• Push in gently to install the roller brush. Before replacing, make sure the brush is
completely dry.
sales@ibuture.com
EN
01 02 03 04 05 06 07 08 09 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70 71 72

Related product manuals