To Next PageTo Next Page
Need help?Do you have a question about the BW Broadcast TX300 and is the answer not in the manual?
General| Frequency Range | 87.5 - 108 MHz |
|---|---|
| Modulation | FM |
| RF Output Connector | N-type female |
| MPX Input | BNC |
| Cooling | Forced air |
| Output Power | 300 W |
| Power Supply | 100-240 VAC, 47-63 Hz |
| Audio Inputs | XLR balanced |
| RDS/RBDS Input | BNC |
| Operating Temperature | -10 to +45 °C |
| Dimensions | 19" 2U rack mount, 450mm deep |
| Input Connector | XLR balanced, BNC unbalanced |
Overview of the BW Broadcast TX 150/300 FM broadcast transmitter's capabilities.
Covers mains voltage, RF hazards, toxic materials, CE and WEEE compliance.
Step-by-step instructions for initial transmitter setup and connection.
Details the connectors and controls on the transmitter's front and rear panels.
Explanation of the front panel LCD display screens and controls for monitoring.
Guides on setting the transmitter frequency via internal switches or LCD.
Instructions for controlling and setting the RF output power level.
Describes transmitter alarms for RF power, PLL lock, and modulation failure.
Details using PC applications or terminal programs for remote operation.
Explains different operational modes configured via internal jumpers.
Discusses pre-emphasis and filter clippers for optimal audio performance.
Lists detailed RF, Stereo, Limiter, and other technical parameters.
Explains the function of the main circuit boards: combo, power amplifier, LCD.
Visual representation of the transmitter's internal signal flow and components.
Overview of how internal boards and components are interconnected.
Detailed circuit diagram for the audio limiter section of the combo board.
Comprehensive list of components for the transmitter's combo board.
