To Next PageTo Next Page
Need help?Do you have a question about the BW Broadcast TX-V2 and is the answer not in the manual?
Details the BW Broadcast TX-V2's features, design, and capabilities.
Covers warranty period, registration, return authorization, regulations, and exclusions.
States warranty is non-transferable and limits BW Broadcast's liability for damages.
Addresses statutory rights provided by national law and their relation to warranty regulations.
Highlights hazards related to mains voltage, RF output, and toxic materials like Beryllium oxide.
Covers compliance, electrical shock prevention, environmental warnings, and instruction adherence.
Guidance on safe handling, placement, ventilation, heat, power source, grounding, and cleaning.
Details front/rear panels, I/O alarms, and XLR connectors for 1U models.
Details front/rear panels, I/O alarms, and XLR connectors for 2U TX300/TX600 models.
Details front/rear panels, I/O alarms, and XLR connectors for 2U TX1000/TX1500 models.
Details front/rear panels, I/O alarms, and XLR connectors for 3U TX2500 model.
Explains using the scroll wheel and buttons for menu navigation, parameter editing, and text input.
Describes the on-screen display elements: Status Box, Menu Box, and Meters.
Provides a step-by-step guide for initial transmitter setup and connections.
Illustrates various connection scenarios: RDS encoder, external audio processor, and combined setups.
Covers RF settings, audio configuration, triggers, alarms, and system parameters.
Configuration for frequency, power, MPX source, FSK, RF mute, and power scheduling.
Configuration for MPX source, audio input, processing preset, and audio mode.
Configuration and examples for triggers and alarms, including email notifications.
Configuration for date, time, users, network, email, HTTP, Telnet, RS232, logging, and diagnostics.
Configuration for Ethernet (IP, DHCP), Email, HTTP, Telnet, and RS232.
Details logging methods (RS232, File, UDP) and system diagnostics.
Accessing unit information (About) and performing reboot/factory reset.
Describes the Status Bar, Alarms/Notifications, Navigation Bar, and main sections of the web interface.
Details sections like Status/Config, Audio Meters, Log Files, Firmware Update, and Factory Reset.
Lists commands for text-based control: get, set, reboot, and factoryReset.
Explains how to retrieve, set, reboot, and factory reset parameters using commands.
Details API authentication and methods for setting/reading parameters via HTTP requests.
Provides API endpoints for retrieving meter values and accessing log files.
Details parameters for frequency, power, MPX source, FSK, RF mute, and power scheduling.
Details parameters for MPX source, audio input, processing presets, audio mode, and pre-emphasis.
Details parameters for configuring triggers and alarms, including actions, delays, and email notifications.
Details parameters for date, time, users, network, email, HTTP, Telnet, RS232, logging, and diagnostics.
Covers Ethernet, Email, HTTP, Telnet, RS232, and logging parameters.
Details about unit information (About) and reset functions (Reboot, Factory Reset).
Troubleshooting guides for no/low RF output, VSWR faults, no modulation, and low modulation levels.
Troubleshooting guides for unexpected power changes, MPX input sound issues, and temperature faults.
Provides contact details for BW Broadcast's 24 Hour Support Team for further assistance.
Details common RF, Audio/MPX I/O, Stereo, Limiter, Temperature, and VSWR protection specs.
Lists detailed specifications for various transmitter models (TX5 V2 to TX2500 V2).
General| Brand | BW Broadcast |
|---|---|
| Model | TX-V2 |
| Category | Transmitter |
| Language | English |
