BW Broadcast TX-V2 - Unit Information and Reset Parameters

Product Version
This read only parameter displays the product version.
Serial Number
This read only parameter displays the serial number.
Hardware Version
This read only parameter displays the HW version.
Software Version
This read only parameter displays the SW version.
Control Version
This read only parameter displays the control board version.
AIO FW Version
This read only parameter displays the AIO(All in One) PLL+ firmware version.
8.5.18 Reboot
Reboots the unit. When the reboot is performed from the FP, a confirmation window will pop
up asking to confirm the choice.
8.5.19 Factory Reset
Performs a factory reset, setting all the parameters to its default value. All user changes will
be lost except network settings.
77