BWT Bewamat 25A - Default Chapter; Table of Contents

3
3
AUS
1 Safety Instructions 4
1.1 General safety instructions 4
1.2 Scope of the documentation 4
1.3 Personnel qualications 4
1.4 Transport and installation 4
1.5 Symbols used 5
1.6 How safety instructions are displayed 5
1.7 Product-specic safety instructions 5
1.8 Important notes 6
2 Scope of Delivery 7
3 Use 7
3.1 Intended Use 7
4 Function 8
5 Installation Requirements 8
5.1 General information 8
5.2 Qualied Sta󰀨 8
5.3 Site of installation and surrounding area 8
5.4 Feed-in water 9
5.5 Installation 9
6 Installation 10
6.1 Installation diagram 11
7 Start-up 12
7.1 Operation of the Controller 12
7.2 Preparing the brine 13
Table of Contents
8 Operation 14
8.1 Setting the hardness of blended water 14
8.2 Handing over the unit to the operator 14
8.3 Setting the supply of softened water 15
8.4 Setting the time/day of the week 16
8.5 Changing the time of regeneration 17
8.6 Starting regeneration manually 17
8.7 Adding regenerative 18
8.8 Service message 18
9 Operator Responsibilities 19
9.1 Inspection 19
9.2 Maintenance 19
10 Warranty 19
11 Troubleshooting 20
12 TechnicalSpecications 21
12.1 Dimensions 23
13 Machine and Maintenance Log 24