BXB Electronics WMP-2100 - Page 6

5
broadcasting, the connector will output DC
5V which can be applied to flash alarm
(BXB WS-335T)
○
6  Remote Control：Dry contacts trigger connector. When broadcasting, the
connector becomes a short circuit; it can be used to
switch on other equipments as well.
○
7
RF OUT（Yellow）：Signal output (from main console - decoders) connector
 Main Control：Connector for main cable (WMP-7c)
B+ OUT（Red）：DC-24V power connector for remote decoder (WMP-60)
G（Black）：Common ground for remote decoder (WMP-60) control signal
RF IN（Blue）：Signal input (from decoders - main console) connector
I.T（Purple）：Connector for intercom signal
○
8  Link：Connector for other main console(s)
○
9  PC-Data：RS-232 interface for BXB graphical control software
○
10  EXPAND：Connector for extension control device (WMP-2100A)
○
11
 AC 110V- 240V（FUSE 250V 8A）：AC power socket and power switch (AC
90~240V 50/60Hz)