F6 OWNER’S MANUAL
133
Transmission oil
Automatic transmission
Check the oil level with the engine at
normal operation temperature.
1．Drive the vehicle till the oil temperature
is reaching the usual temperature
(70~80 ).℃
2．Park the vehicle on level ground.
3．Change the shift lever to every position,
make the oil inject into torque converter and
hydraulic circuit, and then put the lever at N
position, keep engine in normal idle speed,
and must apply the park braking.
4．Remove the dipstick (yellow loop) from
the transmission, and wipe it with a clean
cloth.
COLD upper and lower marks
HOT upper and lower marks
5．Insert the dipstick all the way into the
transmission.
6．Remove the dipstick and check the fluid
level. 7．If the oil level is below the lower
mark, remove the filler plug and add oil into
the tube to make the level between upper
and lower marks of HOT.
To Next Page
Loading...
