F6 OWNER’S MANUAL
179
Anti-rust
Generally speaking, there are two reasons
for vehicle eroding:
1．The moisture which accumulates in the
hole of body. The mud and proof-freeze salt
which accumulates in the clearance of
vehicle bottom easily accumulates
moisture and make the parts easilier
eroded.
2．Scaling off of protective layer and paint
of body surface and vehicle bottom
There are many kinds of anti-dust measures
on your vehicle. Making some simple
periodic maintenance is helpful to avoid
vehicle eroding.
1、Immediately repair when finding the
dropping of paint and nick.
2、Check up and wash door as well as
osculum under the body.
3、Check up the humidity of floor dress. The
carpet and floor cushion will keep the
humidity for a long time, especially in
winter. moisture will make the floor eroded.
4、Wash the body bottom with high pressure
squirt gun. It is important for the vehicle
which running on the road with proof-freeze
salt in winter. It is a good method to the area
where climate is wet and often has the sea
breeze. Carefully protect the ABS wheel
sensors and connect them with all wheels by
wire.
5、You should repair and check up the
anti-dust layer of vehicle bottom
periodically.
To Next Page
Loading...
