F6 OWNER’S MANUAL
43
Ignition switch
The ignition switch has four positions:
1．LOCK (0)
2．ACCESSORY( )Ⅰ
3．ON( )Ⅱ
4．START( )Ⅲ
LOCK(0)—You can insert or remove the
key only in this position. To turn the key
from ACCESSORY( ) to LOCK(0), and Ⅰ
you must push the key in slightly. If your
vehicle is A/T vehicle, to remove the key,
the shift lever is advised in Park or neutral
position. The parking lock will lock the
steering wheel after you remove the key.
If the front wheels are turned, the anti-theft
lock may make it difficult to turn the key
from LOCK (0) to ACCESSORY( ). Ⅰ
Firmly turn the steering wheel to the left or
to the right as you turn the key
Friendly tips
Do not remove the key from the
ignition switch, otherwise the steering
wheel will be locked and the vehicle
may be losing control.
Before removing the key from the
ignition switch, make sure the shift
lever is in the Park position.
ACCESSORY( )Ⅰ —You can operate
the audio system and the accessory
power sockets in this position.
ON ( )Ⅱ —This is the normal key
position when driving. Several of the
lights on the instrument panel come on
as a test when you turn the ignition
switch from the ACCESSORY (I) to the
ON (II) position.
To Next Page
Loading...
