F6 OWNER’S MANUAL
193
Engine malfunction indicator
The indicator is on for several seconds
when turning ignition switch to ON ( ). Ⅱ
That shows an emission control system may
have failure. You may not feel unmoral, but
the failure may lower ability of saving fuel
and cause more emission. You may cause
more serious hurt when go on working at
the state.
If the indicator is on, park your vehicle at
the road and close engine. Anew start
engine and check up the indicator. If the
indicator is still on, call BYD authorized
service station for checking up your vehicle.
Before the repairman come, carefully drive
to avoid the throttle valve full opening and
drive at a high speed. If the indicator is
frequently on, even if close it according to
the above step, it is necessary to call BYD
authorized service station for repairing.
Friendly tip
If go on driving vehicle when the
malfunction indicator is on. That will
hurt emission system and the engine. Its
repair isn’t included in the maintenance.
To Next Page
Loading...
