F6 OWNER’S MANUAL
143
Check up the test indicator window on the
battery to inspect the state of battery. There
is the mean of all the color of test indicator
window on the battery label
Check up the erodent extent of battery
terminal (white or yellow powder). To
remove it, should coat the saleratus on the
surface of terminal, the terminal will
produce the air bubble and gradually get
brown, when hasn’t the bubble, clean it by
clean water, and make it dry with cloth or
paper. Finally coat the grease on the surface
of terminal to avoid eroding further.
If the terminal has a hard eroding, firstly
clean it with saleratus water, then screw it
with spanner and take cable out of terminal.
Notice: be sure to disconnect the cathode; to
fix it anew, must connect it finally. Clean it
with the terminal cleaning tool or steel
brush, anew connect it and fix it tightly,
then coat grease on the surface of terminal.
To Next Page
Loading...
