F6 OWNER’S MANUAL
146
3．Hold the end which has the locking
button of blade, take the blade from the
holder. Pull it until the fixed button leaves
off the holder.
4. Check up new blader, if it hasn’t the
plastic which cling to rear edge or metal
strengthening plate, please take out the old
blades’ and fix it to new blade.
5．Slide the new blade into holder until the
locking button is locked.
6．Assemble the blade assembly to wiper
arm and make sure to lock it to desired
position.
7．Put wiper arm to windshield.
Firstly put the wiper arm of driver side, then
passengers’.
To Next Page
Loading...
