F6 OWNER’S MANUAL
165
2．Push the bottom cover.
3．To disassemble the connecter of electric
device from the bulb, push the both sides
reed of connecter of electric device, and pull
the connecter down.
4．Contrarotate bulb for quarter circle, and
disassemble it from front fog lamp assembly
5．Fix the new bulb to front fog lamp
assembly. Rotate it for quarter circle
clockwise, and make it locked to proper
position.
6．Connect the connecter of electric device
to new bulb, make sure it is well connected.
7．Open front fog lamp, make sure whether
the new bulb work normally or not.
8．Fix the bottom cover, and fix the fixing
bolt and make it tight.
To Next Page
