F6 OWNER’S MANUAL
167
Replace rear license plate light bulb
1．Open trunk.
2．Prize the interior trimming panel of trunk
cover carefully, and disassemble the interior
trimming buckle of L/R corner.
Carefully lift a corner of interior trimming
panel of trunk cover and make the mount
appear.
3．Pinch the lock button of light mount
tightly, disassemble the mount from the
light assembly.
4．Pull out the bulb,. And fix well new bulb.
5．Test new bulb to make sure whether the
new bulb work normally.
6．Fix the mount to original place and make
it locked to proper position.
7．Fix the interior trimming panel of trunk
cover to original position.
Push the interior trimming buckle into the
hole.
To Next Page
Loading...
