F6 OWNER’S MANUAL
182
5．Unscrew the wing bolt and take the spare
tire out of trunk.
6．Put plug woods in front and back of tire
which shows the diagonal line to changed
tire.
7．Loosen the wheel nuts 1/2 of a turn with
the wheel wrench.
8．Find out the jacking point nearest the tire
which you need to change. Place the jack
under the jacking point, and turn the end
bracket clockwise until the top of the jack
contacts the jacking point. Make sure the
jacking point tab is resting in the jack notch.
Notice
Use spare jack following vehicle. If you
want to use the jack to lift other
vehicles or use other jack to lift you
vehicle, the jack or your vehicle may be
damaged.
To Next Page
Loading...
