8
Components
I.1 COMPONENTS
The following items are included:
PART NO.
1. CAP 1000+ Viscometer
2. Cone Spindle(s) 7531 through 7536, 7560 through 7563
3. Spindle Case CAP-106Y
4. Solvent Trap CAP-118
5. Power Cord: 115V DVP-65
220V DVP-66
UK DE-8
Germany DE-7
6. Operating Instructions Manual M/02-313
The following optional items may have been included:
7. Viscosity Standard Fluid for calibration See Table A-1 in Appendix A
Please check to be sure that you have received all components, and that there is
no damage. If you are missing any parts, please notify BYK-Gardner or your local
BYK-Gardner representative immediately. Any shipping damage must be reported to
the carrier. Save the packing container, if possible, for future use when returning the
viscometer to BYK-Gardner or an authorized dealer for service.
Head
Serial Tag Info
on Back of
Viscometer Head
Handle for Raising
and Lowering
Viscometer Head
Column
Foam Shipping Insert
P/N CAP-122
Base
Console
Cone Spindle
P/N CAP-S-XX
The
Flat
Solvent Trap
P/N C1K-63
Thumb Screw
P/N CAP-85Y
Figure I-1: Components
To Next Page
Loading...
