CD5 User's Manual
5
AC POWER CORD CONNECTION
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH THE BLADE WIDTH
OF THE PLUG TO THE SLOT WIDTH. THE PLUG MUST BE
FULLY INSERTED TO THE SLOT.
For CANADA
Handling Precautions
❶
Connecting Other Devices
Unplug the AC power cord from the outlet before connecting or disconnecting other
devices. Exercise caution when handling the AC power cord. When disconnecting the
AC cord from a socket, make sure you pull the plug, and not the cord itself.
❷
Turning Power On/Off
Your system components should be turned on/off in the following order to avoid
generating noise from your speakers and damaging the speakers themselves or other
devices:
▷
Turning power on: Turn on this appliance before turning on the DA converter or
amplier connected to this appliance.
▷
Turning power off
: Turn off the amplier before turning off this appliance.
❸
Optical Semiconductor Laser Pickup
The optical pickup is one of the important components that determine the performance
of a CD transport. Never touch the optical lens of the pickup with your fingers, etc.
Always place the CD Stabilizer on the CD-Turntable in the CD tray to keep the lens
clean when not in use as well.
❹
CD Stabilizer
Only use the provided CD Stabilizer with this appliance. Commercially available
stabilizers may cause this appliance to malfunction.
❺
Handle With Care
Avoid exerting excessive force on the cabinet, the switch, the knob, the terminal and the
CD-Turntable on this appliance.
To Next Page
Loading...
