EasyManuals Logo

C-SCOPE L2 Series User Manual

C-SCOPE L2 Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Beware of multiple services. C.Scope Locators will not always indicate services
that are close together or one above the other.
Do not use the equipment in areas where hazardous gases may be present.
Check for underground services before using the Earth Stake.
ALWAYS
EXCAVATE
WITH CARE
C.Scope Locators detect services radiating a detectable signal.
There may be some services that do not radiate and cannot be located.
Do not use the equipment outside of the temperature range -10˚C to +50˚C
as the batteries may cease to function adequately.
Geographical conditions such as hills and mountains may effectively screen signals
and prevent a detectable Radio signal.
C.Scope Locators alone will not always locate every service.
Use a Generator or Transmitter wherever possible.
The C.Scope Generator/ Transmitter leads MUST NOT be connected directly to
a live service.
Performance may be impaired by unusually strong electromagnetic fields.
Do not hold the Locator earpiece close to the ear for extended periods.
WARNINGS
Always make sure that the Locator and Generator/ Transmitter are set to the same
frequency when used together.
Do not touch the metal of the C.Scope Generator/ Transmitter Crocodile Clips or
of the Plastic Pipe Tracer terminals when in use.
2
It is recommended that the operation of the Locator and Generator/ Transmitter is regularly checked (see pages 52-55).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the C-SCOPE L2 Series and is the answer not in the manual?

C-SCOPE L2 Series Specifications

General IconGeneral
BrandC-SCOPE
ModelL2 Series
CategorySecurity Sensors
LanguageEnglish