C-SCOPE L2 Series User Manual

Your middle or little finger should be used to squeeze,
and hold on, the On/Off trigger.
Your index finger will then be free to adjust the
Sensitivity Control.
When in use the Locator should always be held upright.
NEVER swing the Locator such that it moves away from
the vertical. A single audible beep is sounded to indicate
if the Locator is being used incorrectly.
Using the Locator: Holding the Locator
18
incorrect
correct
90
O

C-SCOPE L2 Series Specifications

General

Brand	C-SCOPE
Model	L2 Series
Category	Security Sensors
Language	English