C-SCOPE L2 Series User Manual

50
Signal Current Measurement
Limitations of Signal Current Measurement
There are some situations where it may not be possible to gain an
accurate Signal Current Measurement reading:
 At a sharp curve or bend in the route of the service.
 At a T junction in the service.
 At the very end point of the service.
 Close to any large metallic objects such as metal fences or vehicles.
 Within 25 metres of the position of the Generator/ Transmitter.
 If the signal is of poor quality.

C-SCOPE L2 Series Specifications

General

Brand	C-SCOPE
Model	L2 Series
Category	Security Sensors
Language	English