Instruction Booklet2-Series
10
ASSEMBLING YOUR SCOOTER
To assemble scooter, you can repeat the disassembly direction in reverse.
A
bbreviated directions are given below. Refer to Figures on pages 11 - 12 to
l
ocate parts.
1.Tighten the Tiller Angle Adjustment to lock the tiller into its upright position.
2.Place front basket.
3.Place battery pack in battery compartment.
4.Place seat on seat post and pulling Seat Rotation Lever upwards to putting down seat
into seat post then tighten seat lock knob to secure.
To Next Page
Loading...
