C.T.M. 2 Series User Manual

Instruction Booklet2-Series
13
TROUBL ESHOOTING
Number of
Flashes
Problem Solution
1
2
3
4
5
6
7
8
9
Battery needs
recharging
Recharge the batteries soon.
Must recharge before using.
Check battery condition and connections.
Check battery condition and
connections. Contact your authorized
d
ealer to check your battery charger.
Contact your authorized dealer.
Contact your authorized dealer.
Contact your authorized dealer.
Contact your authorized dealer.
Contact your authorized dealer.
Contact your authorized dealer.
Battery voltage too low
to operate scooter
Short in motor
Brake malfunction
Thumb lever not in
neutral
Thumb lever malfunction
Motor problems
Other internal errors
Battery voltage too high
Here are some suggestions about solving problems you may have with your scooter. There
is a LED Self-Diagnostic Warning Light on the Control Panel. To check the Self-Diagnostic
Wa
rning Light, turn on the key and count the number of blinks on the Warning Light.

C.T.M. 2 Series Specifications

General

Brand	C.T.M.
Model	2 Series
Category	Scooter
Language	English